AMT Electronics
AMT DC 12V, 1.25A AC/DC - Noiseless Power Adapter (with EU plug)
AMT DC 12V, 1.25A AC/DC - Noiseless Power Adapter (with EU plug)
SKU:YJS12N
Couldn't load pickup availability
ABOUT THE PRODUCT
A specialized noiseless AMT Electronics 12 Volt power supply with a maximum current of 1.25 Amperes.
IMPORTANT
This power supply unit has no grounding contacts. If you hear a kind of «buzzing hum» in the speakers when using this PSU, it means that your guitar circuit is NOT GROUNDED by a common wire. In this case, it is necessary that your guitar amp/combo/mixing console (or other device at the end of the guitar/bass circuit) has a PLUG WITH GROUND CONTACTS. Moreover, such a plug must be plugged into an outlet with a properly implemented, really working ground!
If you have a similar problem, please contact our technical support by email → support@amtelectronics.com — we will definitely help you!
► RECOMMENDED AND FULLY COMPATIBLE WITH AMT DEVICES
- The entire LA line (Legend Amps)
- The entire LA2 line (Legend Amps 2)
- The entire LA3 Light / LA3 Light BLE line (Legend Amps 3)
- The entire AMT Bricks line of preamps
-
AMT UBR PB-3 - pedalboard platform (Bricks / LA3 Light)
- AMT SS-11A / AMT SS-11B / AMT SS-20 preamps
- The entire AMT Pangaea devices line
- The entire line of FX Drive-mini pedals
- AMT HR-1 Heater — JFET overdrive/booster pedal
- AMT RY-1 Reverberry Digital Reverb
- AMT SY-1 Stutterfly Digital Delay
- AMT WH-1 — Optical WAH-WAH pedal for guitar
- AMT WH-1B — Optical WAH-WAH pedal for bass
- AMT LLM-2 ZERO — Optical Volume Pedal
- AMT Reincarnator RD-2
- AMT Chameleon CAB CN-1
- AMT FS-2MIDI Footswitch
- AMT GR-4 switchboard
- AMT Ozzulator CH-2 — bass / guitar chorus effect
- AMT Incinerator NG-1 — noise gate pedal
- AMT Incinerator NG-2 — noise gate pedal
- AMT EX-10F-II - Mini Expression & Footswitch Pedal
- AMT Tubecake TC-3M (in 1,5W mode)
- AMT Tubecake 1,5W
- AMT EgoGig EG-4
► FEATURES
- Output voltage: 12 V (DC)
- Output current: 1,25 А
- Power Type: AC (50 Hz / 60 Hz)
- Range of operating voltage: 100-240 V
- Male right angled DC Plug 5,5 mm x 2,1 mm x 9,5 mm
- Polarity: minus is inside (center "-"), plus "+" is outside
- Cable length: 1,5 m
-
EU plug is in included
► NOTE
This power supply is suitable for pedals from other manufacturers that require 12 volts and have the same connection polarity.
► USER'S GUIDE
All other necessary information about the device (User’s Guide, videos, etc.) you'll find on the product's page at the AMT Media Center:
https://media.amtelectronics.com/amt-dc-12v-125a/
💡 FOR THIS DEVICE, YOU MAY NEED TO PURCHASE
Extra plugs are purchased separately:
|
EU plug for AMT Noiseless Power Adapters
|
US plug for AMT Noiseless Power Adapters
|
UK plug for AMT Noiseless Power Adapters
|
IMPORTANT NOTE ABOUT THE POWER SUPPLY
For powering the AMT devices always use specialized power supplies originally designed for guitar pedals & gear meeting the following basic requirements:
Please, don't try to use for these purposes the usual cheapest power supply from household appliances and electronics, like from your laptop, Wi-Fi router, etc.! Such power supplies have a reverse polarity compared to AMT devices, so it won't work! Even if you're «the guy was born with a soldering iron in the hand» and almost ready to change a polarity of such power supply — we strongly not recommend you do that!
Those kinds of power supplies are not intended for using with the guitar gear. Otherwise, you'll get a problematic very noisy guitar sound full of «hum», «cheep», and other sound «effects»!
