AMT Electronics
AMT BULAVA SS-30 — Studio Series 3-channel JFET Guitar Preamp (w/o power supply!)
AMT BULAVA SS-30 — Studio Series 3-channel JFET Guitar Preamp (w/o power supply!)
SKU:SS-30
Couldn't load pickup availability
ABOUT THE PRODUCT
The AMT SS-30 is a 3 channel JFET preamp loaded with maximum power and crunch.
The SS-30 Bulava pedal is a non-tube JEFT driven preamp, offering modern high gain metal tones in a small portable enclosure.
► FEATURES
- Features 3 switchable independent channels, each with their own master control for precise leveling of all channels.
- Clean and Crunch/Lead have their own 3 band EQ of Low, Mids, and High for customization of each channel.
- The SS-30 includes three switchable buttons for added tone options:
- Drive tone shift
- Crunch bright
- Clean boost
- The SS-30 also includes an FX Loop for adding external modulation effects in the correct signal chain location.
- Blistering Crunch and Lead Tones: Design focused to simulate ultra high-gain amp heads, this give your expensive amplifiers a run for their money! Never has there been such an affordable, feature packed, amazing sounding 3 channel guitar preamp as the SS-30 Bulava!
-
Direct to Amplifier or Computer/DAW/Mixer: The SS-30 is equipped with dual outputs →
- One is for connection to a guitar amplifier;
- Another one — for direct connection to a computer, DAW, or mixing device.
- 3.5 mm jack to control external MIDI devices.
► TECHNICAL PARAMETERS
- Weight: 507 g
- Dimensions: 130 mm x 106 mm x 61 mm
- Supply voltage: 18V DC
- Battery Power: 2 x 6F22 battery (9v)
- Consumption current: 8 mA
- Power supply is not included!
► USER'S GUIDE
All other necessary information about the device (User’s Guide, videos, etc.) you'll find on the product's page at the AMT Media Center:
https://media.amtelectronics.com/amt-ss-30/
💡 FOR THIS DEVICE, YOU MAY NEED TO PURCHASE
The compatible power supply and extra plugs are purchased separately:
|
AMT DC 18V, 0.8А AC/DC Noiseless AC/DC Adapter (with EU plug)
|
US plug for AMT Noiseless Power Adapters
|
UK plug for AMT Noiseless Power Adapters
|
IMPORTANT NOTE ABOUT THE POWER SUPPLY
For powering the AMT devices always use specialized power supplies originally designed for guitar pedals & gear meeting the following basic requirements:
Please, don't try to use for these purposes the usual cheapest power supply from household appliances and electronics, like from your laptop, Wi-Fi router, etc.! Such power supplies have a reverse polarity compared to AMT devices, so it won't work! Even if you're «the guy was born with a soldering iron in the hand» and almost ready to change a polarity of such power supply — we strongly not recommend you do that!
Those kinds of power supplies are not intended for using with the guitar gear. Otherwise, you'll get a problematic very noisy guitar sound full of «hum», «cheep», and other sound «effects»!
